SUSE Linux 10下如何重命名网卡

Shutting down service network  .  .  .  .  .  .  .  .  .  .  .  .  .  done

4、编辑配置文件

#将原来的eth0 与 eth1注释掉

#并将新的mac地址条目改为eth0与eth1

bo2dbp:~ # vi /etc/udev/rules.d/30-net_persistent_names.rules

#SUBSYSTEM=="net", ACTION=="add", SYSFS{address}=="00:0c:29:8a:6c:c8", IMPORT="/lib/udev/rename_netiface %k eth0"

#SUBSYSTEM=="net", ACTION=="add", SYSFS{address}=="00:0c:29:8a:6c:d2", IMPORT="/lib/udev/rename_netiface %k eth1"

SUBSYSTEM=="net", ACTION=="add", SYSFS{address}=="00:0c:29:99:df:0f", IMPORT="/lib/udev/rename_netiface %k eth0"

SUBSYSTEM=="net", ACTION=="add", SYSFS{address}=="00:0c:29:99:df:19", IMPORT="/lib/udev/rename_netiface %k eth1"

5、使用rename_netiface命令重命名网络接口

bo2dbp:~ # cd /lib/udev

bo2dbp:/lib/udev # ./rename_netiface eth3 eth0

INTERFACE=eth0

DEVPATH=/eth0

RENAMED=yes

bo2dbp:/lib/udev # ./rename_netiface eth4 eth1

INTERFACE=eth1

DEVPATH=/eth1

RENAMED=yes

6、重启网络

bo2dbp:/lib/udev # rcnetwork start

Hint: you may set mandatory devices in /etc/sysconfig/network/config

Setting up network interfaces:

lo

lo        IP address: 127.0.0.1/8

IP address: 127.0.0.2/8

Checking for network time protocol daemon (NTPD):                     unused

lo                                                                done

eth0      device: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)

eth0      configuration: eth-bus-pci-0000:02:00.0

eth0      IP address: 192.168.7.71/24

Checking for network time protocol daemon (NTPD):                     unused

（编辑：佛山站长网）

【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容!